GetLog Alpha

getlog.cmd

@@ -0,0 +1,295 @@
+@echo off
+REM Usage: 
+REM   Normal mode: getlog <caseno> [filename]
+REM   Setup mode:  getlog setup
+REM   Folder setup: getlog foldersetup
+REM   Install:     getlog install
+
+set "SCRIPT_DIR=%~dp0"
+set "SCRIPT_PATH=%~f0"
+set "CONFIG_FILE=%SCRIPT_DIR%getlog_config.dat"
+set "FOLDER_CONFIG=%SCRIPT_DIR%getlog_folder.dat"
+
+REM Check for setup modes
+if /i "%~1"=="setup" (
+    call :setup
+    goto :eof
+)
+
+if /i "%~1"=="foldersetup" (
+    call :foldersetup
+    goto :eof
+)
+
+if /i "%~1"=="install" (
+    call :install
+    goto :eof
+)
+
+if /i "%~1"=="uninstall" (
+    call :uninstall
+    goto :eof
+)
+
+REM Normal mode - check for required arguments
+if "%~1"=="" (
+    echo Usage: %~n0 ^<caseno^> [filename]
+    echo.
+    echo Examples:
+    echo   %~n0 1010011 support.tgz    - Download specific file
+    echo   %~n0 1010011                - Download entire case directory
+    echo.
+    echo Setup mode: %~n0 setup
+    echo Folder setup: %~n0 foldersetup
+    echo Install: %~n0 install
+    exit /b 1
+)
+
+REM Load username from config or use default
+set "USERNAME=pashwani"
+if exist "%CONFIG_FILE%" (
+    set /p USERNAME=<"%CONFIG_FILE%"
+)
+
+REM Load folder preference or use default (SJLNT structure)
+set "FOLDER_MODE=SJLNT"
+if exist "%FOLDER_CONFIG%" (
+    set /p FOLDER_MODE=<"%FOLDER_CONFIG%"
+)
+
+set "CASE=%~1"
+
+REM Check if filename is provided
+if "%~2"=="" (
+    set "DOWNLOAD_MODE=dir"
+    echo No filename provided. Will download entire case directory.
+) else (
+    set "DOWNLOAD_MODE=file"
+    set "FILE=%~2"
+)
+
+REM Determine destination based on folder mode
+if /i "%FOLDER_MODE%"=="OLD" (
+    set "DEST=%USERPROFILE%\Downloads\Traces n Logs\%CASE%"
+    echo Using OLD folder structure: Traces n Logs
+) else (
+    set "DEST=%USERPROFILE%\Downloads\SJLNT\%CASE%"
+    echo Using NEW folder structure: SJLNT
+)
+
+REM Create destination folder if it doesn't exist
+if not exist "%DEST%" (
+    mkdir "%DEST%" 2>nul
+    if errorlevel 1 (
+        echo ERROR: Cannot create directory: %DEST%
+        echo Please check your permissions or disk space.
+        exit /b 1
+    )
+    echo Created folder: %DEST%
+)
+
+REM Perform download based on mode
+if "%DOWNLOAD_MODE%"=="dir" (
+    echo Downloading entire case directory using username: %USERNAME%
+    echo Remote source: %USERNAME%@sjanalysis.citrite.net:/upload/ftp/%CASE%
+    echo Local destination: %DEST%
+    echo.
+    echo This may take some time depending on the directory size...
+    echo.
+    
+    REM First, let's test the connection and check if the remote directory exists
+    echo Testing connection to remote server...
+    ssh -o BatchMode=yes -o ConnectTimeout=5 "%USERNAME%@sjanalysis.citrite.net" "ls -la /upload/ftp/%CASE%/ 2>/dev/null || echo 'Directory not found'" >nul 2>&1
+    
+    echo Starting download...
+    
+    REM Use scp -r for recursive directory copy - REMOVE trailing slash from source
+    REM The issue was likely with the trailing slash in the source path
+    scp -rp "%USERNAME%@sjanalysis.citrite.net:/upload/ftp/%CASE%" "%DEST%"
+    
+    if errorlevel 1 (
+        echo.
+        echo SCP failed with error code: %errorlevel%
+        echo Possible issues:
+        echo   1. Case directory %CASE% doesn't exist on remote server
+        echo   2. Network connectivity issue
+        echo   3. Incorrect username
+        echo.
+        echo You can run 'getlog setup' to reconfigure username.
+        echo To check if directory exists: ssh %USERNAME%@sjanalysis.citrite.net "ls -la /upload/ftp/%CASE%/"
+        exit /b 1
+    )
+    
+    echo.
+    echo Entire case directory downloaded successfully to: %DEST%
+    echo.
+    
+    REM Show downloaded contents
+    echo Directory contents:
+    echo -------------------
+    dir /b "%DEST%" 2>nul || echo (No files downloaded or directory empty)
+) else (
+    echo Downloading file using username: %USERNAME%
+    echo Remote file: /upload/ftp/%CASE%/%FILE%
+    
+    scp -p "%USERNAME%@sjanalysis.citrite.net:/upload/ftp/%CASE%/%FILE%" "%DEST%"
+    
+    if errorlevel 1 (
+        echo SCP failed with error code: %errorlevel%
+        echo Please check:
+        echo   1. File exists on remote server
+        echo   2. Username is correct
+        echo   3. Network connection
+        echo.
+        echo Run 'getlog setup' to reconfigure username.
+        exit /b 1
+    )
+    
+    echo.
+    echo File downloaded successfully to: %DEST%
+    echo Full path: %DEST%\%FILE%
+)
+
+goto :eof
+
+:setup
+echo Current username: %USERNAME%
+echo.
+set /p "NEW_USER=Enter new username: "
+if "%NEW_USER%"=="" (
+    echo Username cannot be empty.
+    goto :setup
+)
+echo %NEW_USER%>"%CONFIG_FILE%"
+echo Username saved successfully.
+goto :eof
+
+:foldersetup
+echo.
+echo Current folder structure: %FOLDER_MODE%
+echo.
+echo Available options:
+echo   1. SJLNT (new) - %USERPROFILE%\Downloads\SJLNT\<caseno>
+echo   2. OLD (legacy) - %USERPROFILE%\Downloads\Traces n Logs\<caseno>
+echo.
+set /p "FOLDER_CHOICE=Enter folder structure (1 for SJLNT, 2 for OLD): "
+
+if "%FOLDER_CHOICE%"=="1" (
+    echo SJLNT>"%FOLDER_CONFIG%"
+    echo Folder structure set to SJLNT (new).
+) else if "%FOLDER_CHOICE%"=="2" (
+    echo OLD>"%FOLDER_CONFIG%"
+    echo Folder structure set to OLD (legacy).
+) else (
+    echo Invalid choice. Using default (SJLNT).
+    echo SJLNT>"%FOLDER_CONFIG%"
+)
+echo.
+echo Run: getlog ^<caseno^> [filename] to download files.
+goto :eof
+
+:install
+echo Installing getlog for global access...
+echo ========================================
+echo.
+
+REM Check if already in PATH
+echo %PATH% | find /i "%SCRIPT_DIR%" >nul
+if not errorlevel 1 (
+    echo Script is already in PATH.
+    echo Location: %SCRIPT_DIR%
+    goto :check_admin
+)
+
+REM Check for administrator privileges
+net session >nul 2>&1
+if %errorlevel% neq 0 (
+    echo Warning: Administrative privileges required for system-wide installation.
+    echo You can still install for current user only.
+    echo.
+    choice /c SU /m "Install for: [S]ystem (admin required) or [U]ser"
+    if errorlevel 2 goto :user_install
+    goto :system_install
+)
+
+:system_install
+echo Installing for all users (requires admin)...
+echo.
+REM Add to system PATH using setx
+setx PATH "%PATH%;%SCRIPT_DIR%" /M >nul
+if errorlevel 1 (
+    echo Failed to update system PATH. Trying user PATH...
+    goto :user_install
+) else (
+    echo Successfully added to system PATH.
+    echo Script directory: %SCRIPT_DIR%
+    echo.
+    echo You may need to restart your terminal for changes to take effect.
+)
+goto :eof
+
+:user_install
+echo Installing for current user only...
+echo.
+REM Add to user PATH
+setx PATH "%PATH%;%SCRIPT_DIR%" >nul
+if errorlevel 1 (
+    echo Failed to update user PATH.
+    echo.
+    echo Manual installation steps:
+    echo 1. Copy this script to a directory already in your PATH
+    echo 2. Or add this directory to your PATH manually:
+    echo    %SCRIPT_DIR%
+) else (
+    echo Successfully added to user PATH.
+    echo Script directory: %SCRIPT_DIR%
+    echo.
+    echo You may need to restart your terminal for changes to take effect.
+)
+goto :eof
+
+:check_admin
+echo.
+echo You can now run 'getlog' from any directory.
+echo.
+goto :eof
+
+:uninstall
+echo Uninstalling getlog...
+echo ======================
+echo.
+echo Warning: This will only remove the script directory from PATH.
+echo The script files and configuration will not be deleted.
+echo.
+echo Script location: %SCRIPT_DIR%
+echo.
+
+choice /c YN /m "Are you sure you want to remove getlog from PATH? [Y/N]"
+if errorlevel 2 (
+    echo Uninstall cancelled.
+    goto :eof
+)
+
+echo.
+echo Removing from PATH...
+
+REM Create a temporary PowerShell script to safely remove from PATH
+set "PS_SCRIPT=%TEMP%\remove_from_path.ps1"
+(
+echo $currentPath = [Environment]::GetEnvironmentVariable('PATH', 'User')
+echo $systemPath = [Environment]::GetEnvironmentVariable('PATH', 'Machine')
+echo $scriptDir = "%SCRIPT_DIR:\=/%"
+echo $newUserPath = ($currentPath -split ';' ^| Where-Object { $_ -ne "%SCRIPT_DIR%" } ^| Where-Object { $_ -ne "" }) -join ';'
+echo $newSystemPath = ($systemPath -split ';' ^| Where-Object { $_ -ne "%SCRIPT_DIR%" } ^| Where-Object { $_ -ne "" }) -join ';'
+echo [Environment]::SetEnvironmentVariable('PATH', $newUserPath, 'User')
+echo [Environment]::SetEnvironmentVariable('PATH', $newSystemPath, 'Machine')
+echo "PATH updated. You may need to restart your terminal."
+) > "%PS_SCRIPT%"
+
+powershell -ExecutionPolicy Bypass -File "%PS_SCRIPT%"
+del "%PS_SCRIPT%" >nul 2>&1
+
+echo.
+echo getlog has been removed from PATH.
+echo Note: Script files and configuration remain in: %SCRIPT_DIR%
+goto :eof