PCDU/getlog.cmd

@echo off
REM Usage: 
REM   Normal mode: getlog <caseno> [filename]
REM   Setup mode:  getlog setup
REM   Folder setup: getlog foldersetup
REM   Install:     getlog install

set "SCRIPT_DIR=%~dp0"
set "SCRIPT_PATH=%~f0"
set "CONFIG_FILE=%SCRIPT_DIR%getlog_config.dat"
set "FOLDER_CONFIG=%SCRIPT_DIR%getlog_folder.dat"

REM Check for setup modes
if /i "%~1"=="setup" (
    call :setup
    goto :eof
)

if /i "%~1"=="foldersetup" (
    call :foldersetup
    goto :eof
)

if /i "%~1"=="install" (
    call :install
    goto :eof
)

if /i "%~1"=="uninstall" (
    call :uninstall
    goto :eof
)

REM Normal mode - check for required arguments
if "%~1"=="" (
    echo Usage: %~n0 ^<caseno^> [filename]
    echo.
    echo Examples:
    echo   %~n0 1010011 support.tgz    - Download specific file
    echo   %~n0 1010011                - Download entire case directory
    echo.
    echo Setup mode: %~n0 setup
    echo Folder setup: %~n0 foldersetup
    echo Install: %~n0 install
    exit /b 1
)

REM Load username from config or use default
set "USERNAME=pashwani"
if exist "%CONFIG_FILE%" (
    set /p USERNAME=<"%CONFIG_FILE%"
)

REM Load folder preference or use default (SJLNT structure)
set "FOLDER_MODE=SJLNT"
if exist "%FOLDER_CONFIG%" (
    set /p FOLDER_MODE=<"%FOLDER_CONFIG%"
)

set "CASE=%~1"

REM Check if filename is provided
if "%~2"=="" (
    set "DOWNLOAD_MODE=dir"
    echo No filename provided. Will download entire case directory.
) else (
    set "DOWNLOAD_MODE=file"
    set "FILE=%~2"
)

REM Determine destination based on folder mode
if /i "%FOLDER_MODE%"=="OLD" (
    set "DEST=%USERPROFILE%\Downloads\Traces n Logs\%CASE%"
    echo Using OLD folder structure: Traces n Logs
) else (
    set "DEST=%USERPROFILE%\Downloads\SJLNT\%CASE%"
    echo Using NEW folder structure: SJLNT
)

REM Create destination folder if it doesn't exist
if not exist "%DEST%" (
    mkdir "%DEST%" 2>nul
    if errorlevel 1 (
        echo ERROR: Cannot create directory: %DEST%
        echo Please check your permissions or disk space.
        exit /b 1
    )
    echo Created folder: %DEST%
)

REM Perform download based on mode
if "%DOWNLOAD_MODE%"=="dir" (
    echo Downloading entire case directory using username: %USERNAME%
    echo Remote source: %USERNAME%@sjanalysis.citrite.net:/upload/ftp/%CASE%
    echo Local destination: %DEST%
    echo.
    echo This may take some time depending on the directory size...
    echo.
    
    REM First, let's test the connection and check if the remote directory exists
    echo Testing connection to remote server...
    ssh -o BatchMode=yes -o ConnectTimeout=5 "%USERNAME%@sjanalysis.citrite.net" "ls -la /upload/ftp/%CASE%/ 2>/dev/null || echo 'Directory not found'" >nul 2>&1
    
    echo Starting download...
    
    REM Use scp -r for recursive directory copy - REMOVE trailing slash from source
    REM The issue was likely with the trailing slash in the source path
    scp -rp "%USERNAME%@sjanalysis.citrite.net:/upload/ftp/%CASE%" "%DEST%"
    
    if errorlevel 1 (
        echo.
        echo SCP failed with error code: %errorlevel%
        echo Possible issues:
        echo   1. Case directory %CASE% doesn't exist on remote server
        echo   2. Network connectivity issue
        echo   3. Incorrect username
        echo.
        echo You can run 'getlog setup' to reconfigure username.
        echo To check if directory exists: ssh %USERNAME%@sjanalysis.citrite.net "ls -la /upload/ftp/%CASE%/"
        exit /b 1
    )
    
    echo.
    echo Entire case directory downloaded successfully to: %DEST%
    echo.
    
    REM Show downloaded contents
    echo Directory contents:
    echo -------------------
    dir /b "%DEST%" 2>nul || echo (No files downloaded or directory empty)
) else (
    echo Downloading file using username: %USERNAME%
    echo Remote file: /upload/ftp/%CASE%/%FILE%
    
    scp -p "%USERNAME%@sjanalysis.citrite.net:/upload/ftp/%CASE%/%FILE%" "%DEST%"
    
    if errorlevel 1 (
        echo SCP failed with error code: %errorlevel%
        echo Please check:
        echo   1. File exists on remote server
        echo   2. Username is correct
        echo   3. Network connection
        echo.
        echo Run 'getlog setup' to reconfigure username.
        exit /b 1
    )
    
    echo.
    echo File downloaded successfully to: %DEST%
    echo Full path: %DEST%\%FILE%
)

goto :eof

:setup
echo Current username: %USERNAME%
echo.
set /p "NEW_USER=Enter new username: "
if "%NEW_USER%"=="" (
    echo Username cannot be empty.
    goto :setup
)
echo %NEW_USER%>"%CONFIG_FILE%"
echo Username saved successfully.
goto :eof

:foldersetup
echo.
echo Current folder structure: %FOLDER_MODE%
echo.
echo Available options:
echo   1. SJLNT (new) - %USERPROFILE%\Downloads\SJLNT\<caseno>
echo   2. OLD (legacy) - %USERPROFILE%\Downloads\Traces n Logs\<caseno>
echo.
set /p "FOLDER_CHOICE=Enter folder structure (1 for SJLNT, 2 for OLD): "

if "%FOLDER_CHOICE%"=="1" (
    echo SJLNT>"%FOLDER_CONFIG%"
    echo Folder structure set to SJLNT (new).
) else if "%FOLDER_CHOICE%"=="2" (
    echo OLD>"%FOLDER_CONFIG%"
    echo Folder structure set to OLD (legacy).
) else (
    echo Invalid choice. Using default (SJLNT).
    echo SJLNT>"%FOLDER_CONFIG%"
)
echo.
echo Run: getlog ^<caseno^> [filename] to download files.
goto :eof

:install
echo Installing getlog for global access...
echo ========================================
echo.

REM Check if already in PATH
echo %PATH% | find /i "%SCRIPT_DIR%" >nul
if not errorlevel 1 (
    echo Script is already in PATH.
    echo Location: %SCRIPT_DIR%
    goto :check_admin
)

REM Check for administrator privileges
net session >nul 2>&1
if %errorlevel% neq 0 (
    echo Warning: Administrative privileges required for system-wide installation.
    echo You can still install for current user only.
    echo.
    choice /c SU /m "Install for: [S]ystem (admin required) or [U]ser"
    if errorlevel 2 goto :user_install
    goto :system_install
)

:system_install
echo Installing for all users (requires admin)...
echo.
REM Add to system PATH using setx
setx PATH "%PATH%;%SCRIPT_DIR%" /M >nul
if errorlevel 1 (
    echo Failed to update system PATH. Trying user PATH...
    goto :user_install
) else (
    echo Successfully added to system PATH.
    echo Script directory: %SCRIPT_DIR%
    echo.
    echo You may need to restart your terminal for changes to take effect.
)
goto :eof

:user_install
echo Installing for current user only...
echo.
REM Add to user PATH
setx PATH "%PATH%;%SCRIPT_DIR%" >nul
if errorlevel 1 (
    echo Failed to update user PATH.
    echo.
    echo Manual installation steps:
    echo 1. Copy this script to a directory already in your PATH
    echo 2. Or add this directory to your PATH manually:
    echo    %SCRIPT_DIR%
) else (
    echo Successfully added to user PATH.
    echo Script directory: %SCRIPT_DIR%
    echo.
    echo You may need to restart your terminal for changes to take effect.
)
goto :eof

:check_admin
echo.
echo You can now run 'getlog' from any directory.
echo.
goto :eof

:uninstall
echo Uninstalling getlog...
echo ======================
echo.
echo Warning: This will only remove the script directory from PATH.
echo The script files and configuration will not be deleted.
echo.
echo Script location: %SCRIPT_DIR%
echo.

choice /c YN /m "Are you sure you want to remove getlog from PATH? [Y/N]"
if errorlevel 2 (
    echo Uninstall cancelled.
    goto :eof
)

echo.
echo Removing from PATH...

REM Create a temporary PowerShell script to safely remove from PATH
set "PS_SCRIPT=%TEMP%\remove_from_path.ps1"
(
echo $currentPath = [Environment]::GetEnvironmentVariable('PATH', 'User')
echo $systemPath = [Environment]::GetEnvironmentVariable('PATH', 'Machine')
echo $scriptDir = "%SCRIPT_DIR:\=/%"
echo $newUserPath = ($currentPath -split ';' ^| Where-Object { $_ -ne "%SCRIPT_DIR%" } ^| Where-Object { $_ -ne "" }) -join ';'
echo $newSystemPath = ($systemPath -split ';' ^| Where-Object { $_ -ne "%SCRIPT_DIR%" } ^| Where-Object { $_ -ne "" }) -join ';'
echo [Environment]::SetEnvironmentVariable('PATH', $newUserPath, 'User')
echo [Environment]::SetEnvironmentVariable('PATH', $newSystemPath, 'Machine')
echo "PATH updated. You may need to restart your terminal."
) > "%PS_SCRIPT%"

powershell -ExecutionPolicy Bypass -File "%PS_SCRIPT%"
del "%PS_SCRIPT%" >nul 2>&1

echo.
echo getlog has been removed from PATH.
echo Note: Script files and configuration remain in: %SCRIPT_DIR%
goto :eof